Titman - defining router tooling

Solid Surface

Set Descending Direction

Items 1-12 of 32

  1. TCT Two Flute Bowl Aperture Trimmer

    TCT Two Flute Bowl Aperture Trimmer

    Use with 30mm guide bush or Bearing on shank for opening out tops for sinks and bowls. Also for most bevel operations.
  2. TCT Two Flute Bevel Matching

    TCT Two Flute Bevel Matching

    Fitted with self-guiding Bearing (Shank mounted). For edging counter tops, bevel joints and sink profiles.
  3. TCT Two Flute Reverse Bevel

    TCT Two Flute Reverse Bevel

    For bevelling inside bowl tops and similar applications. Avoids need to turn workpiece.
  4. TCT Two Flute Undercut Bevel

    TCT Two Flute Undercut Bevel

    Fitted with self-guiding Bearing (Shank mounted). For edging counter tops, bevel joints and sink profiles.
  5. TCT Two Flute Overlay Trimmer

    TCT Two Flute Overlay Trimmer

    For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
  6. TCT Two Flute Step Down

    TCT Two Flute Step Down

    For creating a 'step down' shadow line between bowl and sheet.
  7. TCT Two Flute Undermount Profile Bowl Cutter

    TCT Two Flute Undermount Profile Bowl Cutter

    Produces masked bowl profile on undermounted bowls.
  8. TCT Two Flute Non-Drip Edge

    TCT Two Flute Non-Drip Edge

    Helps to reduce the effect of overlay joint line.
  9. TCT Two Flute Non Drip

    TCT Two Flute Non Drip

    This cutter produces a 'waterfall' effect on a worktop. Can be used against a wall for splashback.
  10. TCT Two Flute Rounding Over

    TCT Two Flute Rounding Over

    Fitted with a Shank mounted Bearing. First cut with TTXC301, finshing using matching TTXC321. Eliminates flat on edge.
  11. TCT Two Flute Radius

    TCT Two Flute Radius

    Fitted with self-guiding Bearing for rounding over. See cutters TTXC301 and TTXC321 for complete rounding over.
  12. TCT Two Flute Radius

    TCT Two Flute Radius

    Rounding over effect or full bullnose for three and four sheet thickness. First cut with TTXC301, finshing using matching TTXC321. Eliminates flat on edge.
Set Descending Direction

Items 1-12 of 32