Titman - defining router tooling

Saw Blades

Saw Blades

Using the best technology and finest materials, we are able to manufacture saw blades with the following characteristics:

  • Precision laser cut plates with minimum tolerances.
  • Premium quality plates hardened up to 45 Rockwell HRC.
  • Laser cut slots control the expansion of the blade caused by heat and centrifugal force.
  • Special carbide grade, increases the life of the tips.
  • Advanced tri-metal brazing.
  • All the blades are balanced and tuned. The tuning ring can be seen on most blades as a faint ring line about 3/4 the diameter of the blade.
Set Descending Direction

12 Item(s)

  1. Ripping Saw Blades

    Ripping Saw Blades

    Saw Blades with anti-kickback device. Suitable for ripping hard and soft wood.
  2. Ripping & Crosscutting Saw Blades

    Ripping & Crosscutting Saw Blades

    Saw Blades suitable for ripping and crosscutting with fine finish on soft/hard solid wood and wood composite panels.
  3. Finishing Saw Blades

    Finishing Saw Blades

    Saw Blades to cut bilaminated panels with the employment of the scoring blade, to achieve a good finish on melemine coated panels and a long service life.
  4. Finishing Saw Blades

    Finishing Saw Blades

    Saw Blades to cut bilaminated panels with the employment of the scoring blade, to achieve a good finish on melemine coated panels and a long service life.
  5. Finishing Saw Blades

    Finishing Saw Blades

    Saw Blades to cut bilaminated panels without the need of the scoring blade up to 40mm thick, to achieve a good finish on melemine coated panels and a long service life.
  6. Split Scoring Blades

    Split Scoring Blades

    To score the melemine on bilaminated chipboard and MDF panels.
  7. Conical Scoring Blades

    Conical Scoring Blades

    To score the melemine on bilaminated chipboard and MDF panels. These blades allow vertical adjustment of the scorer in relation to the panel sizing Saw Blade kerf.
  8. Ripping Saw Blades for Portable Machines & Mitre Saws

    Ripping Saw Blades for Portable Machines & Mitre Saws

    Ripping saw blades with a positive cutting angle, suitable for wood and wood composites. To be used on portable machines and mitre saws. Particulalrly good at cutting across the grain.
  9. Ripping & Crosscutting Saw Blades for Portable Machine & Mitre Saws

    Ripping & Crosscutting Saw Blades for Portable Machine & Mitre Saws

    Saw Blades with a positive cutting angle, suitable for wood and wood composites. To be used on portable machines and mitre saws. Particulalrly good at cutting across the grain.
  10. Solid Surface Specific Saw Blades

    Solid Surface Specific Saw Blades

    Saw Blades optimized to cut solid surface materials. The special Double Triple Chip grind and the plate thickness give the best quality cut in solid surfaces.
  11. Saw Blades for Plastic Materials Including Plexiglass

    Saw Blades for Plastic Materials Including Plexiglass

    Saw Blades to cut plastic materials. Blades with negative hook and triple chip tooth design to cut plastics.
  12. Non-ferrous Metal Saw Blades

    Non-ferrous Metal Saw Blades

    To cut drawn products and tubes with a thickness that does not exceed 3mm.
Set Descending Direction

12 Item(s)