Titman - defining router tooling

Trimmers

Set Descending Direction

12 Item(s)

  1. TCT 90 degree Internal Bearing Guide Edge Trimmer - Small Diameters

    FLUSH TRIM BEARING GUIDED 90 DEG DOUBLE FLUTE TCT - SMALL DIAMETERS

    Widley used for copy profiling and flush trimming the smaller diameter also make them a more suitable choice for trimming apertures and holes where the need to keep the inside corner radius to a minimum is necessary. These industrial quality premium grade tungsten carbide flush trimmers are ideal for wood, plywood, MDF and other wood composites, plastics, and solid surface materials
  2. TCT 90 degree Bearing Guide Edge Trimmer

    FLUSH TRIM BEARING GUIDED 90 DEG DOUBLE FLUTE TCT

    These industrial quality premium grade tungsten carbide flush trimmers are ideal for wood, plywood, MDF and other wood composites, plastics, and solid surface materials. Widley used for copy profiling and flush trimming. For smaller diameters than shown here please go to section headed SMALL DIAMETERS further down.
  3. TCT 90 degree Bearing Guide Triple Flute Trimmer

    FLUSH TRIM BEARING GUIDED 90 DEG 3 FLUTE TCT

    Widley used for copy profiling and flush trimming the triple flute design of these cutters are especially useful on material prone to chipping and the dual bottom bearing reduces the tools desire to wander when following a template.These industrial quality premium grade tungsten carbide flush trimmers are ideal for wood, plywood, MDF and other wood composites, plastics, and solid surface materials.
  4. STC Guide And Trim

    LAMINATE TRIMMER SOLID CARBIDE GUIDE STC

    Solid carbide cutters are ideal for trimming thin sheet material - The guide is incorporated into the carbide rod of the tool itself. The small diameters make them perfect for intricate internal trimming too.
  5. REPLACEMENT TIP FLUSH TRIM BEARING GUIDED 90 DEG RT

    REPLACEMENT TIP FLUSH TRIM BEARING GUIDED 90 DEG RT

    This range of replacement TC Tip industrial premium quality flush trimmers are ideal for wood, plywood, MDF and other wood composites, plastics, and solid surface materials. Widley used for copy profiling and flush trimming, the replaceable tip design provides a constant diameter and the flexibility of instant tip changes whilst onsite.
  6. TCT 89 degree Double Guided Trimmer

    FLUSH TRIM TOP AND BOTTOM BEARING GUIDED 90 DEG DOUBLE FLUTE TCT

    With a bearing both on the shank and on the nose of the tool these trimmers are the perfect solution for the template to be placed either on the top or bottom of the workpiece depending on the application needed.These industrial quality premium grade tungsten carbide flush trimmers are ideal for wood, plywood, MDF and other wood composites, plastics, and solid surface materials.
  7. REPLACEMENT TIP TOP AND BOTTOM BEARING GUIDED 90 DEG RT

    REPLACEMENT TIP TOP AND BOTTOM BEARING GUIDED 90 DEG RT

    Replacement tip double fluted guide trimmer with a bearing both on the shank and on the nose of the tool, these trimmers are the perfect solution for the template to be placed either on the top or bottom of the workpiece depending on the application needed. These industrial quality premium grade tungsten carbide flush trimmers are ideal for wood, plywood, MDF and other wood composites, plastics, and solid surface materials and The replacement solid tungsten turnover knives design provides a constant diameter and the flexibility of instant tip changes whilst onsite.
  8. TCT 90 degree Trimmer and V Groove

    FLUSH TRIM WITH V GROOVE BEARING GUIDED 90 DEG TCT

    This double flute cutter for trimming the laminate and or solid lipping whilst at the same time it cuts a decorative 'V' groove in the glue line resulting in a concealed seam between the frame and the case. For use on wood, plywood, MDF and other wood composites, plastics, and solid surface materials
  9. TCT 90 degree Solid End Trimmers

    SOLID END BEARING GUIDED FLUSH TRIM 90 DEG TCT

    This particular double fluted flush trimmer has a solid end guide instead of a bearing which is especially useful for heavy duty trimming on internal sections where the use of a normal bearing may result in failure due to extreme heat build up.
  10. TCT 90 degree Bearing Guide Double Trim

    MIDDLE BEARING GUIDED TOP & BOTTOM FLUSH TRIM 90 DEG TCT & RT

    This double flute cutter trims the top and bottom edges simultaneously as bearing follows the profile in the centre of the material.These industrial quality premium grade tungsten carbide flush trimmers are ideal for wood, plywood, MDF and other wood composites, plastics, and solid surface materials
  11. CHAMFER & BEVEL BEARING GUIDED EGDE TRIMMERS  TCT - VARIOUS ANGLES

    CHAMFER & BEVEL BEARING GUIDED EGDE TRIMMERS TCT - VARIOUS ANGLES

    This range of light duty double flute bevel trimmers are ideal for chamfering wood, plywood, MDF and other wood composites, plastics, and solid surface materials as well as laminate trimming.
  12. Replacement Tip Chamfer

    REPLACEMENT TIP CHAMFER EGDE TRIMMERS WITH OR WITHOUT BEARING RT - VARIOUS ANGLES

    This range of double flute replacement tip cutters give angles of 45, 60, 75, 80 and 90 degrees required to produce bevels on formica, melamine, and top trimming PVC.

Set Descending Direction

12 Item(s)