Titman - defining router tooling

Solid Surface

Solid Surface

Titman unique cutters for Corian, Hi-Macs, Staron, Avonite and Hanex

The carbide used on these cutters for Solid Surfaceshas been developed in conjunction with DuPont-Genk.
All profile cutters and relevant straight cutters are profiled to minimise stress fractures.
The soft corners produced by Titman Cutters for Corian, Hi-Mac and Staron and other solid surfaces make finishing that much easier.
The soft corners on the finished piece help to prevent food retention on the work surgaces.
All Titman cutters for solid surface materials are designed to accommodate the Ti-Tire range of bearings.

Set Descending Direction

Items 1-12 of 58

  1. TCT Single Flute

    TCT Single Flute

    More Information
    A high performance, single flute, cutter for extra clearance when cutting apertures and shaping work. The single flute gives a stronger backing support to the cutting edge.
  2. TCT Single Flute Sheared Cut

    TCT Single Flute Sheared Cut

    More Information
    Shear action downcut to reduce breakout for longer life and improved performance. Pushes waste material away from the operator.
  3. TCT Two Flute Inlay Trimmer

    TCT Two Flute Inlay Trimmer

    More Information
    Mini trimmers give a super fine finish. Ideal for cutting out small recesses in wall cladding for electrical fittings and suitable for trimming inlay flush and other trimming operations. Use TTTB22 Bearing for trimming overhanging countertops on undermount bowls.
  4. TCT Two Flute Inlay Trimmer

    TCT Two Flute Inlay Trimmer

    More Information
    For trimming flush coloured insert strip. Suitable for most edge trimming operations.
  5. TCT Triple Flute Inlay Trimmer

    TCT Triple Flute Downturn Trimmer

    More Information
    Self-guiding triple flute cutter for extra fine trimming. Suitable for most edge trimming operations.
  6. TCT Two Flute Bowl Aperture Trimmer

    TCT Two Flute Bowl Aperture Trimmer

    More Information
    Use with 30mm guide bush or Bearing on shank for opening out tops for sinks and bowls. Also for most bevel operations.
  7. TCT Two Flute Bevel Matching

    TCT Two Flute Bevel Matching

    More Information
    Fitted with self-guiding Bearing (Shank mounted). For edging counter tops, bevel joints and sink profiles.
  8. TCT Two Flute Reverse Bevel

    TCT Two Flute Reverse Bevel

    More Information
    For bevelling inside bowl tops and similar applications. Avoids need to turn workpiece.
  9. TCT Two Flute Undercut Bevel

    TCT Two Flute Undercut Bevel

    More Information
    Fitted with self-guiding Bearing (Shank mounted). For edging counter tops, bevel joints and sink profiles.
  10. TCT Two Flute Overlay Trimmer

    TCT Two Flute Overlay Trimmer

    More Information
    For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
  11. TCT Two Flute Overlay Trimmer

    TCT Two Flute Overlay Trimmer

    More Information
    A range of cutters for most popular bowl angles and cut lengths.
  12. TCT Two Flute Overlay Trimmer

    TCT Two Flute Overlay Trimmer

    More Information
    TCT Two Flute Overlay Trimmer
Set Descending Direction

Items 1-12 of 58